FV100 - Foundation, Sub-Floor, Soffit, Crawlspace, Shed, and Garage Easy Replacement Vent
(5 x 14 Rough Opening)
Fits Rough opening size range: Height: 4-1/2” to 6-1/4" Length: 13” to 14-1/2"
Easy Trim tabs to fit the smaller sizes down to 4.5 x 13 openings.
EZRvent FV100 foundation vent installation
EZRvent - FV100:
An easy-to-install replacement vent for foundation, subfloor, soffit, crawlspace, shed, and garage vents. Our FV100 frame is made of a durable UV protected high-grade automotive/ marine corrosion and impact resistant plastic with heavy gauge 1/8" pitch metal screen that will last for years. Installation is easy and saves labor time! Simply remove the old vent screen, push new EZRvent in place, and install one 2 ½” screw (exterior PrimeGuard 10 polymer-coated included) at each end of the vent. It's as easy as that! Existing stucco and siding remain intact.
Although designed as a 5" x 14" rough opening vent (6"x16” replacement/retrofit vent), the EZRvent FV100 can be used in new construction for a higher grade finished look than standard new construction vents.
Product Features:
- Easy and quick install: Vents are pre-drilled and countersunk
- No stucco or siding replacement required for installation
- Higher Grade Construction
- Higher Grade Look & Finish: picture frame shadow box frame with recessed screen
- One size covers a range of openings
- Securely mounts with two internal surface screws (included)
- 1/8 inch mesh screen meets most building/ insurance codes and offers added protection of keeping swarming bees out in addition to all the other critters.
- Continuous welded/heat-staked mesh
- Stainless Steel and Copper Mesh options are available for the most demanding coastal applications
- Corrosion and impact-resistant frame material is UV-stabilized automotive/ marine grade polypropylene, which is stronger and more environmentally friendly than typical PVC or ABS.
- Unique Patent Pending Design
- Made in the USA
Applications:
- Vents for 16 inch on center framed walls
- Vents for Framed, Siding, Stucco, Concrete, or Masonry walls with 5x14 rough openings
- Vents with 5x14 to 4.5x13 rough openings (with easy trim tab modification)
- Newer Building Codes requiring 1/8 inch pitch mesh
- Foundation Vent
- Subfloor Vents
- Crawl Space Vents
- Soffit Vents
- Garage Vents
- Pest exclusion: Rats, Bees, Snakes, Racoons, Opossums, and other Critters
- Vent Covers
- Multi Media Cabinet Vent
- IT Cabinet Vent
EZRvent FV100 -8H Foundation Garage Vent
EZRvent FV100 -SS8H 316 Stainless Steel
Foundation Garage Vent
EZRvent FV100 -8HC Copper Foundation Garage Vent
If a Local Dealer is not in your area:
FV100 Fit Sizes:
The FV100 was designed as a single size to fit a wide range of sizes and will fit all of the following sizes:
Fits OPening Size | Min | Max |
|---|---|---|
Height | 4.5" | 6.25" |
Length | 13" | 14.5" |
Depth | 1" | - |
FV100 Vent Rough Opening Fit Sizes - Standard (W)" x (H)":
5x13.5, 5x14, 5x14.25, 6x13.5, 6x14, 6x14.25
FV100 Vent Rough Opening Fit Sizes - Reduced with easy trim tab modification (W)" x (H)":
4.5 x 13, 4.5 x 13.5, 4.5 x 14, 4.5 x 14.5, 5 x 13, 6 x 13
EZRvent FV100 Vent Opening Fit Range
FV100 Outline Drawing Back with Fit dimensions
EZRvent trim tab spacers can now be removed with a box knife to fit the smaller fit size range
EZRvent FV100-8HC Copper Foundation, Sub-floor, Soffit and Garage vent. Best solution for beach front applications.
FV100 Mesh Screen Options:
-8H Heavy Galv
Installer Grade
Economic Choice
-SS8H Heavy 316 SS
Custom Home Pro Grade
Strongest Option - Good Coastal Choice
-8HC Heavy Copper
Custom Home Pro Grade
Best Coastal Corrosion-Resistant Choice
If within 5 miles of the coast or body of water, we recommend selecting our -8HC Copper or second best 316 Stainless -SS8H mesh options for the mesh to be under rust through warranty.
NFV Per Mesh Option:
EZRvent FV100 Open Ventilation Area (NFV) per Mesh Option: (gen 3 frame 2021)
Vent Model | Net Free Ventilation (NFV) |
|---|---|
FV100-8 (Economy Light mesh Discontinued) | 32.3 sq in |
FV100-8H (Pro grade Heavy 1/8 Mesh .023 Hot Dip Galv) | 29.1 sq in |
FV100-SS8H (Custom Pro grade Heavy 1/8 Mesh .028 316 Marine Grade Stainless) | 26.5 sq in |
FV100-8HC (Custom Pro grade Heavy 1/8 Mesh .028 Copper) | 26.5 sq in |
FV100-6HSS (Custom Pro-grade Supper Heavy 1/6 Mesh .035 316 Marine Grade Stainless - Special Order Only) | 27.4 sq in |
FV100-4H* (Heavy 1/4 Mesh .035 - Special Order Only - *1/4" mesh no longer meets code in many areas) | 31.9 sq in |
If a Local Dealer is not in your area:
Installation Steps are Easy as 1 - 2 - 3
1
Remove old vent screen
Rusted out foundation and garage vent before replacement creates vector pest rat problem
2
Push EZRvent in place
EZRvent Easy to install foundation garage vent replacement solution to pest and air flow problems
3
Install 2 Screws
EZRvent easy foundation garage vent DYI replacement solution, ~ 1min installation
Existing stucco, and siding remains intact.
Designed by a construction guy who was in need of simple to install and higher grade house vents. No crawling under the house or in attic to install.
Each easy home replacement vent comes complete with everything you need to install a professionally finished look. With the use of a screwdriver, you are ready to go in minutes.
Simply remove the old vent screen, push the new EZRvent in place, and install one 2 ½” screw at each end of the vent at an angle. It's as easy as that! The existing vent frame remains in place, and the existing stucco or siding remains intact.
It's as Easy as That!
For detailed and special case installation instructions see:
Installation Video:
If a Local Dealer is not in your area:
Summary
Aggregate Rating
4 based on votes
EZRvent
Product Name FV100 Foundation Vent - Garage Vent
